6000 WATT 24 Volt PURE SINE INVERTER CHARGER TO 120Vac OUTPUT LISTED TO UL & CSA

6000 Watt Pure Sine Wave Low Frequency Inverter Charger – 24V DC, 120V AC Output

This 6000-watt pure sine wave low frequency inverter charger is built for large industrial, commercial, off-grid, and mobile power applications. Designed with an integrated battery charger and automatic transfer switch, it ensures continuous, clean power even under heavy load conditions. Ideal for use in solar systems, RV and mobile setups, emergency backup, and business continuity applications requiring 100–120V AC.

This inverter charger features auto frequency detection, allowing seamless operation on either 50Hz or 60Hz, depending on regional requirements.

🔋 Charging Capabilities

Equipped with a 60-amp multi-stage smart battery charger, this unit can charge from any 120V AC source, including shore power, residential wall outlets, or gas/diesel generators. It’s compatible with GEL, AGM, Lead Acid, and Lithium batteries, with seven selectable battery-type settings for optimized charging.

⚙️ Key Performance Specs

• Continuous Power Output: 6000 watts

• Surge Capability: 18,000 watts for 20 seconds (300%)

• Voltage Input: 24V DC

• AC Output: Single phase 120V AC

• Transfer Time: Typical 10 ms (max)

• Power Save Mode: Activates when load is <25 watts, reducing idle consumption to <25 watts

• Efficiency: >88% (Inverter), >95% (Line mode)

• Total Harmonic Distortion (THD): <10%

• Output Waveform: Pure sine wave / bypass mode matches input

🔌 Smart Features

• Battery Priority Selector: Run directly from batteries before switching to grid or generator

• Auto Transfer Switch: 80-amp, seamlessly switches power sources

• Power Saver Mode: Conserves energy by “sleeping” until a load of ≥25W is detected

• Low Voltage Protection: Shuts down at 20–21V DC to protect battery life

• Remote Monitoring Ready: Optional wired LED or LCD remote available for convenient operation from a vehicle cab or indoor panel

📐 Dimensions & Build

• Unit Size: 19” L x 16.5” W x 8” H

• Weight: 108 lbs

• Shipping Size: 30.5” x 14.25” x 13.75”

• Shipping Weight: 113 lbs

• Certifications: UL 458, UL 1741, UL 1012, CSA C22.2 No. 107.1 & 107.2

• Construction: Marine-coated for added durability

🔧 Electrical Specs – Input

• 6000 watt low frequency inverter
• 18000 watt surge for 20 seconds 300% surge capability
• 24 Volt DC
• Single phase 120Vac output
• Listed to UL 458, 1741, 1012 and CSA 22.2 NO. 107.1 & 107.2
• Battery priority selector
• Terminal block
• Marine coated and protected
• Multi stage smart charger 60 Amp charges GEL, Lead, AGM, Lithium
• Remote panel available LED or LCD
• Auto frequency
• 10msec typical transfer time
• Selectable 25W power save mode (hibernation)
• 7 battery type settings for charger
• Allows start up and through power with depleted batteries

• Continuous output power: 6000 Watts
• Surge rating: 18000 Watts (20 Seconds)
• Output waveform: Pure Sine/Same as input (Bypass Mode)
• Output voltage 100-110-120Vac
• Output breaker: 80 Amps
• Nominal efficiency: >88% (Peak)
• Line mode efficiency: >95%
• Output frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
• Typical transfer time: 10ms (Max)
• THD: < 10% DC
• Ambient operating temperature: 14°F to 122°F (-10°C to 50°C

Input Specifications

• Nominal input voltage: 24.0Vdc
• Minimum start voltage: 20.0Vdc
• Low battery alarm: 21.0Vdc-22.0Vdc
• Low battery trip: 20.0Vdc-21.0Vdc
• High voltage alarm: 32.0Vdc
• Low battery voltage restart: 26.6Vdc
• Idle consumption: 52.5 watts
• Idle consumption with power saver mode ON: <25 watts

Charger Specifications

• Output voltage: depends on battery Type
• Charger rate: 60A
• Over charge protection shutdown 31.4V
• Selectable charge setting based on battery type
• Adjustable charge current: off-15%-100%
• Four stage smart charger

• Transfer Switch Specifications

  • 80 amp automatic transfer switch
  • 10 ms (max)
• Listed to UL 458, 1741, 1012 and CSA 22.2 NO. 107.1 & 107.2