Tamarack Solar UNI-PGRM/6P2 Economy Horizontal 6 Modules Top of Pole Mount

Horizontal Pole Mount – 6 Module Kit

This kit is designed for solar panels with frame lengths between 38 and 72 inches. For larger modules with frame lengths between 72 and 96 inches, the UNI-PGRM/6P2-47 kit is recommended.

Module Compatibility

The PGRM mount is compatible with solar modules that meet the following requirements:

• Minimum inside frame length of 38 inches, measured end to end

• Frame thickness between 1.18 and 2.0 inches

• Compatible with most solar modules as long as:

  • The complete PV array remains within the PGRM mount's specified total square-footage limits

  • The appropriate mid and end clamps meet the module manufacturer's installation requirements

Module Clamp Options

Two clamp sizes are available depending on module dimensions:

• UNI-PGRM-END and UNI-PGRM-MID: 35-inch clamps designed for modules with frame lengths from 38 to 72 inches. Included with this kit.

• UNI-PGRM-END47 and UNI-PGRM-MID47: 47-inch clamps designed for modules with frame lengths from 72 to 96 inches. Sold separately.

Durable & Adjustable Pole-Mount Design

The Horizontal Pole Mount provides a strong, versatile solution for pole-mounted solar installations. Its adjustable tilt angle, ranging from 0° to 60°, allows the array to be positioned for a variety of installation locations and solar conditions.

Please Note: The 4-inch SCH-40 support pipe and 3-inch SCH-40 main beam pipe are not included and must be supplied by the installer.

Features

• Supports up to 6 solar modules

• Engineered for wind speeds up to 115 mph

• Additional bracing available for higher wind-load requirements

• Designed for straightforward installation and adjustment by one person

• Pre-galvanized construction for added durability

• Stainless steel hardware

• 10 year warranty by Tamarack

General PGRM Mount Components List

Pole Mounts Installation Manual

PGRM6 Pole Mount Data Sheet

Calculation Packet - Top of Post Ground Mount 5 and 6 Modules